Electric Actuators > Assemblies > Actuated Ball Valves > 2 Way Stainless > E Series 3 piece > IP65 Modulating electric actuator

You have selected a standard 2 way 3 piece E Series stainless ball valve fitted with an IP65 J3 weatherproof modulating electric actuator.

Function: Power applied continuously, movement controlled by either a 4-20mA or 0-10VDC input signal. Closes on loss of control signal, stays put on loss of mains power. Self calibrating and auto adjusting digital positioner with feedback as standard.

Actuated Ball Valve Assembly Code: J3-2105E

WITH MODULATING ELECTRIC ACTUATOR

		J+J's  DPS ('Digital Positioning System') The standard on-off electric actuator is converted to a modulating electric actuator by installing this plug & play DPS modulating system. Click the image for a datasheet explaining J+J's DPS system.
		General datasheet on actuated ball valve Type: J3-2100E Download both this general datasheet AND the DPS datasheet for information on the modulating version
Note: Maximum working temperature of this actuated ball valve assembly is +70C                 For working temperatures up to +130C, see Type J3:2115E  here
Click for J3 electric actuator wiring diagram
Click for supplementary DPS instruction sheet
For standard J3 electric actuator instructions		See Download Centre

< Go Back

Home of the J3 Electric Actuator

---