Electric Valve Actuators > Assemblies >Actuated Valve> Ball Valves > 3 Way Brass > IP65 Failsafe Electric Actuator fitted via a mounting kit.

You have selected a 3 way brass ball valve fitted via mounting kit with an IP65 J3 weatherproof failsafe electric actuator.

Function: Power open, power close. In the event of power failure, it will fail to a pre-set safe position using battery power.

                  3 Way Actuated Ball Valve with Failsafe Electric Actuator

                                       fitted via a mounting kit

Assembly code: J3-1314L    (L port)
                      Assembly code: J3-1314TD   (T port - diverting)

                                    Assembly code: J3-1314TM (T port - mixing)

	J+J's  BSR  (Battery 'Spring Return' ) The standard on-off electric actuator is converted to a failsafe electric actuator by installing this plug & play BSR failsafe system. Click the image above for a datasheet explaining J+J's BSR system.
	General datasheet for 3 way actuated ball valve Type: J3-1310 Download both this general datasheet AND the failsafe datasheet for information on the failsafe version
Note: Maximum working temperature of this actuated ball valve assembly is +130C                       For working temperatures above +130C, see Type 2314 here                        A datasheet explaining flow paths in 3 way valves is here.
Click for J3 electric actuator wiring diagram
Click for supplementary BSR instruction sheet
For standard J3 electric actuator instructions					See Download Centre

< Go Back

Home of the J3 Electric Actuator

---