Electric Valve Actuators > Assemblies >Actuated Valve> Ball Valves > 3 Way Brass > IP65 Modulating Electric Actuator fitted via a mounting kit

You have selected a 3 way brass ball valve fitted via mounting kit with an IP65 weatherproof J3 modulating electric actuator.

Function: Power applied continously, movement controlled by either a 4-20mA or 0-10VDC input signal. Closes on loss of control signal, stays put on loss of power. Self calibrating and auto-adjusting digital positioner with feedback as standard.

                      3 Way Actuated Ball Valve with Modulating Electric Actuator

                                            fitted via a mounting kit

Assembly code: J3-1315L (L port)
                              Assembly code: J3-1315TD (T port - diverting flow)

                          Assembly code: J3-1315TM (T port - mixing flow)

		J+J's  DPS ( 'Digital Positioning System') The standard on-off electric actuator is converted to a modulating electric actuator by installing this plug & play DPS modulating system. Click the image for a datasheet explaining J+J's DPS system
		General datasheet for actuated ball valve Type: J3-1310 Download both this general datasheet AND the DPS datasheet for information on the modulating version

Note: Maximum working temperature of this 3 way actuated valve assembly is +130C                    For working temperatures above +130C, see Type J3:2315  here
A datasheet explaining flow paths in 3 way valves is here.
Click for J3 electric actuator wiring diagram
Click for supplementary DPS instruction sheet
Click for standard J3 electric actuator instructions	See Download Centre

< Go Back

Home of the J3 Electric Actuator

---